6 Steps to getting an awesome paint job on your secondhand furniture.

Whether you're looking to update an old piece or transform a find from the thrift store, painting furniture can be a great way to give it a new lease on life.

Following are some painting advice for furniture:

Pick the right paint:

For furniture, you should use a long-lasting, clean-up-friendly paint. Oil-based paints can be more difficult to work with and take longer to dry, but they are frequently the most durable. Although they dry more quickly and are easier to work with than oil-based paints, water-based paints like latex and acrylic may not be as long-lasting. In order to find paints that will be more durable, look for paints made especially for furniture.

Prepare the surface:

The furniture's surface needs to be ready before painting. This may entail smoothing out rough edges, using wood filler to cover dents or holes, and using TSP or a degreaser to clean the surface. Before painting, make sure the surface is completely dry.

Use a primer:

Painting furniture after applying a primer can help the paint adhere better and produce a more uniform finish. Pick a primer that is made for the kind of paint you're going to use.

Apply the paint:

A paintbrush or foam roller works best for painting furniture because they offer more control and accuracy than a sprayer. Apply the paint in even, thin coats, letting each coat completely dry before moving on to the next.

Sand between coats:

Sanding the furniture in between coats of paint can help you achieve a smooth, even finish. Sand the surface lightly using fine-grit sandpaper, being careful not to sand through the paint.

Protect the finish:

After the last coat of paint has dried, you might want to use a wax or polyurethane protective finish. This can aid in preventing scratches and other damage to the paint.


It can be enjoyable and rewarding to DIY paint furniture. You can give your furniture a beautiful, long-lasting finish that will give it new life by picking the right paint, preparing the surface, using a primer, applying the paint in thin, even coats, sanding between coats, and protecting the finish.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.